Bluelab Pro Controller

Bluelab Pro Controller

The Bluelab Pro Controller will maintain perfect and stable pH and nutrient levels in your reservoir, ensuring optimal nutrient availability for your plants at all times. Set your required targets for pH and conductivity and allow the controller to do the rest.

Since there’s no need for any spot checks or manual adjustments, the Bluelab Pro Controller saves you time and labour so that you can focus on growing healthier plants every single time.

When you pair your controller with high-precision Bluelab PeriPod dosers, you’ll have a complete nutrient dosing system. You can also connect other mains-powered pumps by using the Bluelab PowerPod.

The Bluelab Pro Controller takes the complexity out of reservoir management, making precision easier than ever before.

The Bluelab Pro Controller is easy to use and programme, allowing you to choose the settings that work best for your growing setup; you can also adjust settings via Connect computer software. For pH, you can choose to adjust for either pH up (alkali) or pH down (acid). Our highly accurate Bluelab PeriPods will allow you to manage parameter increments down to 0.1 pH and 0.1 EC.

In addition, this controller comes with a temperature probe, ensuring that all your measurements and doses will be automatically compensated for temperature.

The Bluelab Pro Controller allows you to stay connected to your parameters 24/7, automatically delivering results even when you’re not there.

To connect, plug in the included Connect Stick and download our free Connect software. Once installed on your computer, you can set up an account for you and your team members to use. All they need to do is download the free Bluelab Connect mobile app and use the login to connect.

Not only will you be able to view the data being collected by your Bluelab Pro Controller and amend settings on your computer, you’ll also receive real-time notifications of alarms and lockout status updates.

As a guide, Bluelab recommends the following maximum concentration for commonly used acids and alkalines;
Peristaltic Pump tubing (PharMed BPT)
Nitric Acid <35%, Phosphoric Acid <85%, Sulfuric Acid <30%, Citric Acid <60%, Potassium Hydroxide <60%, Potassium Carbonate Concentrated, Potassium Silicate <60%.

The chemical concentrations stated above are a guide. Variations in temperature, pressure, or UV exposure may cause tubing failure which could lead to serious injury if proper safety precautions are not followed. For this reason, it is recommended that the tubing be tested with the desired chemical in the specific application to determine suitability. No warranty (neither express or implied) is given that the information (here or in Bluelab literature) is accurate or complete or that any material is suitable for any purpose.

pH Controller Feed Solution; General Dilution Guidelines.

This is a step-by-step general guide for diluting the initial pH up and pH down fluid for your hydroponics system using pH Controllers.

Understand the Controller: Familiarise yourself with the features and functions of your controller. This will ensure you make the most out of its capabilities and understand how to operate it effectively.

Gather Materials: Collect all necessary materials for the dilution process, including the concentrated pH up and pH down fluids, appropriate protective wear for acid/base/corrosive materials for the face and body, distilled water, measuring cups or beakers, and a stirring rod or spoon.

Determine Dilution Ratio: Some pumps are much faster than others. Adequate dilution is crucial for controlling pH level changes effectively. It is a trial-and-error process to find the correct level of dilution of solution to feed into your controller. You will need to determine the dilution rate in a test reservoir with nutrients added. You want to avoid precipitation, or drastic changes in pH by the controller. Different solution concentrations will require different dilution rates. Larger reservoirs will require lower dilution rates.

Prepare Workspace: Set up a clean and spacious workspace where you can safely handle the fluids and perform the dilution process without any risk of contamination. Wear the protective gear.

Measure Fluids: Using a measuring cup or beaker, carefully measure out the required amount of concentrate pH up or pH down fluid and water. Pour the measured amount into a clean container designated for dilution, mixing thoroughly.

Test: Commence operation of the pH controller, and watch the variation in the pH on the controller (possibly accompany it with using your pH meter) to check the pH level of the solution. Ensure that the dilution of the source controller fluid is adequate so that wild swings in pH are not experienced. The pH up or pH down fluid must be moved in small enough increments so that the desired pH level is achieved without harming the plants with large fluctuations in pH, and so that the precipitation is avoided.

Record: After you have established the correct dilution ratio for your system and your pH adjustment fluid, record the initial dilution of the controller pH fluid, and the size of the adjustments made by the controller in the reservoir when it varies the pH. This data will help you to track and maintain consistency in your hydroponic controller's pH levels.

Label Solution: Label the diluted solution clearly with the date of dilution, the type of fluid (pH up or pH down), and the dilution ratio used. This will prevent confusion and ensure you use the correct solution when adjusting pH levels in your hydroponic system.

Store Properly: Store the diluted solutions in tightly sealed containers away from direct sunlight and extreme temperatures to maintain their effectiveness over time.

By following these steps, you can effectively dilute the initial pH up and pH down fluids for your hydroponics system using your pH Controller, ensuring precise control over pH levels for optimal plant growth.

This product has no reviews.