Trotec TTK 100 E Dehumidifier

Professional dehumidifier with a performance that comes close to the big ones in its class

With the TTK 100 E you have a trendy dehumidifier that combines successful design with advanced control elements.

In contrast to dehumidifiers with analog controllers for unit-free preselection of minimum to maximum operation, with the TTK 100 E you can enter the desired humidity value directly via the digital display. An integrated hygrostat then automatically implements this target and automatically regulates the performance of the compressor and two-stage fan.

The digital display on the clear and easy-to-understand control panel shows you, among other things, the current value of the relative humidity in the room as well as the current room temperature and the entered target value. The device also has a timer function, an automatic fault diagnosis system and a memory function. The integrated memory function ensures that the set humidity value and the operating mode are saved even after switching off. The laundry drying function completes the functionality of the comfortable dehumidifier. The integrated separate hose connection enables the external condensate drainage even in unattended permanent operation - the ideal prerequisite for continuous use, for example in hobby rooms or in holiday homes.

Benefits for practice:

• Hygrostat-controlled automatic dehumidification with target value preselection between 30 and 80% r.H. in 10% steps
• As soon as the desired humidity level is reached, the compressor switches itself off. The fan runs through. If the limit is exceeded, the device is activated automatically.
• Continuous operation
• Display of the desired humidity, the current humidity and the current room temperature
• Memory function
• Automatic fault diagnosis system
• Laundry drying function
• Easily accessible air filter, easy to clean. Filters pet hair, fluff, down, dust and prevents bacterial growth.
• Timer function
• Automatic hot gas for efficient dehumidification even in unheated rooms with a temperature of at least 12 °C
• Connection for external condensate drain
• 2 fan speeds
• Level warning light when the water tank is full
• Overfill protection with auto shutdown

Hot gas defrost

In contrast to circulating air defrosting, dehumidifiers for use in cooler rooms are equipped with a hot gas defrosting system using the bypass method.

Here, the hot refrigerant gas in the compression circuit is actively used for fast and effective defrosting. When icing starts, a special solenoid valve opens automatically and now bypasses the hot gas from the compressor directly to the evaporator instead of to the condenser and closes again after its defrosting to continue the regular refrigerant circuit for the dehumidifying operation.

In contrast to circulating air defrosting, the automatic hot gas defrosting system enables dramatically shorter defrosting phases of just a few minutes, which is an essential requirement for effective air dehumidification in low-temperature areas such as unheated rooms. After all, the actual air dehumidification takes place exclusively in the non-defrosting phases of the drying devices!

For the dehumidification of unheated rooms with temperatures below 15 °C, air dehumidifiers with automatic hot gas are therefore always better suited and more effectively usable compared to circulating air defrosting devices with the same compressor capacity.

At ambient temperatures above 15 °C, however, the performance of dehumidifiers with hot gas and automatic defrosting is more and more similar until it is basically identical at temperatures above approx. 18 °C.

Note: Commercial Use