Quest 70 Filter MERV-13

Product Code: J0746

Quest 70 Filter MERV-13

The Quest 70 is equipped with a MERV 13 media filter. This filter should be checked every three months. Operating the unit with a dirty filter will reduce dehumidifier capacity and efficiency and may cause the compressor to cycle off and on unnecessarily on the defrost control.

DO NOT operate the unit without a filter or with a less-effective filter. Operating the unit without a filter or with a less effective filter may cause internal damage to the unit and invalidate the product warranty.

Check and clean the screen on the outdoor fresh air intake port seasonally. The screen may become plugged during the seasons when there are many particles in the outdoor air.

To replace the filter, remove the filter door from one of the sides of the Quest 70 by pushing the snap button in and gently pulling to door away from the body of the unit, then pulling up to disengage the door flange from the slot, removing the door.

Remove the filter by gently pulling straight out of the unit. Insert the new filter in the same manner, pushing it gently straight into the unit. Replace the filter door by inserting the bottom tab into the slot, aligning the door, and pushing it gently against the unit until the snap button secures the door.

Height	2.000000
Width	23.000000
Length	29.000000
Weight	0.400000

This product has no reviews.

---